Arris C4C - Configure Cable Relay-Agent-Option Circuitid

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1418
configure cable relay-agent-option circuitid
Purpose
Enables the relay agent circuit ID sub-option type.
Default Access Level
15
Command Syntax
configure cable relay-agent-option circuit-id {hex <word> | mac-ifindex | text <text> | us-ifindex}
configure cable relay-agent-option circuit-id {hex [<word>] | mac-ifindex | text [<text>] | us-ifindex}
no
Supplemental
Information
To disable the relay agent circuit ID sub-option type, use the no option.
Parameters
[hex <word>]
Hex string to be used in the sub-option, 64 characters max.
[mac-ifindex]
Indicates that the 4 byte MAC ifIndex is used for the circuit ID relay sub-option.
[text <text>]
ASCII string to be used in the sub-option, 32 characters max.
[us-ifindex]
Indicates that the 4 byte upstream channel ifIndex is used for the circuit ID relay sub-option