Chapter 16: Dynamic Routing Protocols
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 536
configure router isis redistribute static {level-1 | level-2} [metric <int>]
[metric-type {internal | external}] [no]
configure router isis redistribute connected {level-1 | level-2} [metric <int>]
[metric-type {internal | external}] [no]
configure router isis redistribute rip {level-1 | level-2} [metric <int>]
[metric-type {internal | external}] [no]
configure router isis redistribute ospf {level-1 | level-2} [metric <int>]
[metric-type {internal | external}] [match {internal | external1 | external2}] [no]
configure router isis redistribute bgp {level-1 | level-2 | level-1-2} [metric <int>]
[metric-type {internal | external}] [no]
IS-IS Redistribution Commands (IPv4)
The C4/c CMTS supports the redistribution of IPv4 address family connected, OSPF, PD and static routes using the
following IS-IS redistribute commands
configure router isis address-family ipv4 redistribute bgp {level-1 | level-2} [metric <int>]
[metric-type {internal | external}] [no]
configure router isis address-family ipv4 redistribute connected {level-1 | level-2} [metric <int>]
[metric-type {internal | external}] [no]
configure router isis address-family ipv4 redistribute ospf {level-1 | level-2} [match <internal |
external1 | external2>] [metric <int>] [metric-type {internal | external}] [no]
configure router isis address-family ipv4 redistribute static {level-1 | level-2} [metric <int>]
[metric-type {internal | external}] no
configure router isis address-family ipv4 redistribute static {level-1 | level-2} [metric <int>]
[metric-type {internal | external}] [no]
IS-IS Redistribution Commands (IPv6)
The C4/c CMTS supports the redistribution of IPv6 address family connected, OSPF, PD and static routes using the
following IS-IS redistribute commands:
configure router isis address-family ipv6 redistribute connected {level-1 | level-2} [metric <int>]
metric-type {internal | external}] [no]
configure router isis address-family ipv6 redistribute ospf {level-1 | level-2} [match <internal |
external1 | external2>] [metric <int>] metric-type {internal | external}] [no]
configure router isis address-family ipv6 redistribute pd {level-1 | level-2} [metric <int>]
metric-type {internal | external}] no
configure router isis address-family ipv6 redistribute static {level-1 | level-2} [metric <int>]
[metric-type {internal | external}] [no]
OSPFv3 Redistribution Commands
The C4/c CMTS supports redistribution of static, connected and PD routes using the following OPFv3 commands:
To Next Page
Loading...