Arris C4C - How to Enter the Various Command Modes

Chapter 45: CLI Overview
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1101
Table 139. How to Enter the Various Command Modes
Mode
To enter this mode, type …
Resultant Prompt
User EXEC
<login> + <password>
C4>
Privileged EXEC
enable + <password>
C4#
Global configuration
(From Privileged EXEC mode)
configure
C4(config)#
Access-list configuration
(From global configuration mode)
access-list <std-acl-num> | <ext-acl-num>
C4(config-ACL num)#
Cable modulation-profile
(From global configuration mode)
cable modulation-profile <num>
C4(config-mod-profile)
Cable interface configuration
(From global configuration mode)
interface cable <slot>/<downstream port>
C4(cfg-i-cable)#
Cable downstream interface
configuration
(From global configuration mode)
interface cable-downstream <slot>/<downstream
port>
C4(cfg-i-ds)
Cable fiber-node configuration
(From global configuration mode)
fiber-node <name>
C4(config-fiber-node)#
Cable cable intercept
configuration
(From global configuration mode)
cable intercept
C4(config-cable-intercept)
Cable MAC interface
configuration
(From global configuration mode)
interface cable-mac <mac[.sub interface]>
C4(cfg-i-mac)
Cable MAC interface cable
downstream-bonding-group
(From global configuration mode)
interface cable-mac <mac[.sub interface]> cable
downstream-bonding-group <num>
C4(cfg-i-mac-dsbond)#