Arris C4C - Configure Interface Gigabitethernet Ipv6 Nd Prefix No-Advertise

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1796
configure interface gigabitethernet * ipv6 nd prefix * no-advertise
Purpose
Indicates that this prefix will not be sent in router advertisements on the specified interface
Default Access Level
15
Command Syntax
configure interface gigabitethernet <slot>/<port>[.<0-254>] ipv6 nd prefix <word> no-advertise
configure interface gigabitethernet <slot>/<port>[.<0-254>] ipv6 nd prefix <word> no-advertise no
Supplemental
Information
To indicate that the host may not use prefix for auto-configured IPv6 addresses, use the no option.
Parameters
<slot>/<port>[.<0-
254>]
RCM slot number/gigabitEthernet port number[.subinterface number].
Valid range for the C4 CMTS is <17-18>/<0-9>[.<0-254>]
Valid range for the C4c CMTS is <17>/<0-9>[.<0-254>]
<word>
IPv6 address