Arris C4C - Сonfigure Clock Set

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1448
configure clock set
Purpose
Manually sets the clock to the specified date and time. Enter a 4 digit year
Default Access Level
15
Command Syntax
configure clock set <yyyy:mm:dd:hh:mm:ss>
Supplemental
Information
N/A
Parameters
<yyyy:mm:dd:hh:mm:
ss>
yyyy = year; mm=month; dd=day;hh=hour; mm=minutes; ss=seconds
Related Commands
show clock (page 2749)