Arris C4C - Configure Ip Ssh Shutdown

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2095
configure ip ssh shutdown
Purpose
Halts the SSH2 server and all SSH2 session processes such as CLI command shells and should be used after a change has been made.
Default Access Level
15
Command Syntax
configure ip ssh shutdown
configure ip ssh shutdown no
Supplemental
Information
Note: This command will fail if the server’s DSA host public/private key is not available.
Use the no command to restart the SSH2 service.
Related Commands
configure crypto key generate (page 1454)
show ip unreachables (page 2887)