Arris C4C User Manual

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1387
configure cable modem move * cable-downstream * cable-upstream * method
Purpose
Provides various ways to move a modem on the C4 CMTS.
Default Access Level
15
Command Syntax
configure cable modem move <mac addr> cable-downstream <slot/port> cable-upstream <s/p> method {reinit-
mac | broadcast-ranging | unicast-ranging | ranging | direct}
Supplemental
Information
N/A
Parameters
<mac addr>
The 48-bit hardware address of the cable modem to be moved.
<slot/port>
The chassis slot/port for the downstream interface.
<s/p>
The chassis slot/port for the upstream interface.
reinit-mac
Move the modem by reinitializing the MAC
broadcast-ranging
Move the modem by performing broadcast initialization
unicast-ranging
Move the modem by performing unicast ranging
ranging
Move the modem using either broadcast or unicast ranging
direct
Move the modem directly without reinitializing or ranging.

Arris C4C Specifications

General

Brand	Arris
Model	C4C
Category	Control Unit
Language	English