Arris C4C - Configure Route-Map Permit Set Local-Preference

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2290
configure route-map * permit * set local-preference
Purpose
Sets the local preference attribute of routes.
Default Access Level
15
Command Syntax
configure route-map <word> permit [<int>] set local-preference <int>
configure route-map <word> permit [<int>] set local-preference [<int>] no
Supplemental
Information
This command is also used to set the local-preference of routes redistributed into BGP.
To return to the default setting, use the no option.
Parameters
<word>
Name of this route-map
[<int>]
Sequence number
<int>
Local preference