Arris C4C - Configure Router Bgp Address-Family Ipv6 Neighbor Route-Map in

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2368
configure router bgp * address-family ipv6 neighbor * route-map * in
Purpose
Applies a route map to incoming routes.
Default Access Level
15
Command Syntax
configure router bgp [<int>] address-family ipv6 neighbor <word> route-map <word> in
configure router bgp [<int>] address-family ipv6 neighbor <word> route-map [<word>] in no
Supplemental
Information
To remove the route map, use the no option.
Parameters
[<int>]
Autonomous System (AS) number. Valid range is 1-65535
<word
IPv6 access list name.
<word>
Name of the route map.