Arris C4C - Show Bgp Community

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2631
show bgp * community
Purpose
Displays Border Gateway Protocol (BGP) information.
Default Access Level
15
Command Syntax
show bgp <ipv4 | ipv6 | all> <A.B.C.D[/bits]> community [<0-4294967295 | AA:NN>] [<exact-match>]
[<local-AS>] [<no-advertise>] [<no-export>]
Supplemental
Information
N/A
Parameters
<ipv4 | ipv6 | all>
Address-family for address filter.
<A.B.C.D[/bits]>
Network in the BGP routing table to display.
[<0-4294967295 |
AA:NN>]
Community number in the rate from 0-429496295 or AA:NN (autonomous system-community number).
[<exact-match>]
All communities and only those communities specified must be present.
[<local-AS>]
Well-known community.
[<no-advertise>]
Well-known community.
[<no-export>]
Well-known community.