Arris C4C - Show Cable Modem Summary

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2715
show cable modem summary
Purpose
Displays a summary of the number of modems that are on each interface and the overall system.
Default Access Level
1
Command Syntax
show cable modem summary
Supplemental
Information
It displays counts but does not display any information about a particular modem. In the case of bonded modems, the count for
each port will be equal to the number of modems on that port since a single bonded modem will be on multiple ports.
The totals represents the number of modems, not channels, therefore, the sum of the ports should equal or be greater than the
total number of modems. Summaries are given per slot as well as per cable-mac.
Related Commands
SFP and XFP Ethernet Interfaces (page 214)