Arris C4C - BGP CLI Show Commands

Chapter 16: Dynamic Routing Protocols
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 465
 Open
 Update
 Keep Alive
 Notifications
 Route Refresh
 Open Message has been modified in MP-BGP to communicate what address families this BGP Router supports (a.k.a.
Capabilities)
 Update Message has been modified to support encoding advertisements for different address families.
The C4/c CMTS IPv6 address family will support all comparable IPv4 BGP features along with the following BGP features for
the IPv6 Address family:
 IPv6 Address Family route redistribution with optional filtering from:
 Connected
 Static
 OSPFv3
 ISIS
 IPv6 PD
 Peer activation/deactivation configuration
 Peer maximum prefix and maximum prefix warning configuration
 Peer route update filtering (inbound and outbound)
 Peer next-hop-self
 Peer route reflector client
 Aggregate address advertisements
The C4/c CMTS will support 10,000 BGP learned IPv6 routes in the data plane Forwarding Information Base (FIB).
BGP CLI Show Commands
To get the complete list of supported BGP and MP-BGP CLI commands, use the following command syntax:
show all-commands | include bgp
show all-commands | include route-map
show all-commands | include prefix-list