To Next Page

To Previous Page

Chapter 46: Command Line Descriptions

STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide

configure cable filter group * index

Purpose

Configures the IP packet filtering parameters for the specified packet filter group and packet filter index settings.

Default Access Level

Command Syntax

configure cable filter group <1-1023> index <1-63> [dest-ip <ipv4 addr>] [dest-mask <ipv4 mask>]

[dest-port <0-65536>] [ip-proto <int>] [ip-tos <mask> <tos value>] [ip-version <ipv4 | ipv6 | unknown>]

[log] [match-action {accept | drop}] [src-ip <ipv4 addr>] [src-mask <ipv4 mask>] [src-port <0-65536>]

[v6-dest-address <ipv6 addr>] [v6-dest-pfxlen <0-128>] [v6-flow-label <0-1048575>] [v6-src-address <ipv6

addr>] [v6-src-pfxlen <0-128>]

configure cable filter group <1-1023> index <1-63> [dest-ip <ipv4 addr>] [dest-mask <ipv4 mask>]

[dest-port <0-65536>] [ip-proto <int>] [ip-tos <0x0-0xFF>] [ip-version <ipv4 | ipv6 | unknown>] [log]

[match-action {accept | drop}] [src-ip <ipv4 addr>] [src-mask <ipv4 mask>] [src-port <0-65536>] [v6-

dest-address <ipv6 addr>] [v6-dest-pfxlen <0-128>] [v6-flow-label <0-104875>] [v6-src-address <ipv6

addr>] [v6-src-pfxlen <0-128>] no

Supplemental

Information

To delete the packet filter, use the no option.

Parameters

<1-1023>

Group ID.

index <1-63>

The index of a filter within the current group.

[dest-ip <ipv4 addr>]

IPv4 destination address

[dest-mask <ipv4 mask>]

IPv4 destination mask address

[dest-port <0-65536>]

UDP destination port

[ip-proto <int>]

IP protocol

[ip-version <ipv4 | ipv6 |

unknown>

The IP version of the filter entry (IPv4, IPv6 or unknown)

Arris C4C User Manual

Questions and Answers: