Arris C4C - Configure Interface Link-Aggregate Ip Igmp Proxy-Interface

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1850
configure interface link-aggregate * ip igmp proxy-interface
Purpose
Sets the proxy interface (must be an RCM interface).
Default Access Level
15
Command Syntax
configure interface link-aggregate <0-9[.0-254]> ip igmp proxy-interface <gigabitethernet <17-
18>/<09>[.<0-254>]> | link-aggregate <0-9[.0-254]> | tengigabitethernet <17-18>/<10>[.<0-254>]>
configure interface link-aggregate <0-9[.0-254]> ip igmp proxy-interface <gigabitethernet <17-
18>/<09>[.<0-254>]> | link-aggregate <0-9[.0-254]> | tengigabitethernet <17-18>/<10>[.<0-254>]> no
Supplemental
Information
To remove the proxy-interface, use the no option.
Parameters
<0-9[.0-254]>
LAG identifier <lag[sub interface]>
gigabitethernet <17-
18>/<0-9>[.<0-254>]
Configures the gigabitethernet as the proxy interface
link-aggregate <0-9[.0-
254]>
Configures the link-aggregate as the proxy interface
tengigabitethernet
<17-18>/<10>[.<0-
254>]
Configures the tengigabitethernet as the proxy interface