Arris C4C - Configure Router Isis Distribute-List out

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2454
configure router isis distribute-list * out
Purpose
Configures filtering for outbound IS-IS routes in the same VRF.
Default Access Level
15
Command Syntax
configure router isis distribute-list <1-99> out [<connected | static | rip | ospf | bgp>]
configure router isis distribute-list <1-99> out [<connected | static | rip | ospf | bgp>] no
Supplemental
Information
To return to the default settings, use the no option.
Parameters
<num>
Access list used for filtering. Valid range is 1-99.
[<connected |
static | rip | ospf |
bgp>]
Filtering for IS-IS routes originating from:
connected — a connected source
static — a static connection
rip — RIP
ospf — OSPF
bgp — BGP