Arris C4C - Сonfigure Interface Cable-Mac Isis Authentication Mode

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1676
configure interface cable-mac * isis authentication mode
Purpose
Configures the IS-IS authentication mode for LSPs.
Default Access Level
15
Command Syntax
configure interface cable-mac <mac[.s]> isis authentication mode <md5 | text> [<level-1 | level-2>]
configure interface cable-mac <mac[.s]> isis authentication mode [<md5 | text>] [<level-1 | level-2>] no
Supplemental
Information
To reset the circuit type, use the no option.
Parameters
<mac[.s]>
The MAC identifier and optional sub interface.
<md5 | text>
Choose either md5 or plain text
[<level-1 | level-2>]
Specifies the type of adjacencies to be formed on this interface. Valid range is level-1 or level-2.