Arris C4C - Show Running-Config

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 3022
show running-config
Purpose
Displays the writable (configurable) MIB data that is saved in the CMTS persistent memory.
Default Access Level
15
Command Syntax
show running-config [full] [linenum] [verbose]
Supplemental
Information
The output is a list of commands that may be used to enable or disable system features and set each feature’s operational
parameters.
NOTE: This command generates extensive output. If printed, the results of this command could fill well over fifty pages of text for a
fully populated chassis.
Parameters
[full]
Displays all configuration values, including default values.
[linenum]
Enumerates each line with its line number in the output.
[verbose]
Displays the output with ‘configure’ on each line.