Arris C4C - Local Log (Volatile); Configure Monitor Logging; Eliminate Monitor Logging; Display Console Priority

Chapter 41: Logging
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1050
Purpose
Command
Used to display the current logging configuration and utilization statistics
for the monitor.
show logging monitor
See also see "Display Monitor Priority (page 1047).
Configure Monitor Logging
The following example command configures the monitor screen to display logging messages at level 3, critical priority:
configure logging monitor 3
Eliminate Monitor Logging
The following example command eliminates the display of event 3 priorities on the monitor screen:
configure logging monitor 3 no
The following example command eliminates the display of all event priorities on the monitor screen:
configure logging monitor no
Display Console Priority
The following command displays the system console priority event and utilization statistics:
show logging console
An output similar to the following example results:
Console: notifications=122
priority=1(emergency), 2(alert), 3(critical)
Local Log (Volatile)
By default, the C4/c CMTS routes all of the following priority events to the local volatile log:
 emergency (1)
 alert (2)