Arris C4C - Configure Route-Map Permit Set Dampening

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2288
configure route-map * permit * set dampening
Purpose
Defines the BGP route dampening factors for the specified route.
Default Access Level
15
Command Syntax
configure route-map <word> permit [<int>] set dampening <1-45>
configure route-map <word> permit [<int>] set dampening [<1-45>] no
Supplemental
Information
To return to the default setting, use the no option.
Parameters
<word>
Name of this route-map
[<int>]
Sequence number
<1-45>
Half-life time for the penalty in minutes