Arris C4C - Configure Interface Link-Aggregate Isis Authentication Mode

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1918
configure interface link-aggregate * isis authentication mode
Purpose
Configures the IS-IS authentication mode for LSPs.
Default Access Level
15
Command Syntax
configure interface link-aggregate <0-9[.0-254]> isis authentication mode <md5 | text> [<level-1 |
level-2>]
configure interface link-aggregate <0-9[.0-254]> isis authentication mode [<md5 | text>] [<level-1 |
level-2>] no
Supplemental
Information
To reset the circuit type, use the no option.
Parameters
<0-9[.0-254]>
LAG identifier <lag[sub interface]>
<md5 | text>
Choose either md5 or plain text
[<level-1 | level-2>]
Specifies the type of adjacencies to be formed on this interface. Valid range is level-1 or level-2.