Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1383
configure cable modem deny
Populates the CM Deny List table with the specified MAC address.
configure cable modem deny <mac>
configure cable modem deny <mac> no
If a cable modem, whose MAC address has been provisioned in this table, attempts to range on the CAM on the C4 CMTS, this
modem will not receive an IP address.
Note: Currently, the CM Deny List table will accept no more than 1000 MAC addresses.
Once a MAC address is removed from the CM Deny List, the modem would be allowed to register normally by entering the configure
reset cable-modem command or by waiting for the C4 CMTS T9 timer to automatically expire within 15 minutes.
To remove the specified MAC address from the CM Deny List, use the no option.
Parameters
Related Commands
clear counters cable-mac (page 1161)
show cable modem deny (page 2693)
To Next Page
Loading...
