Arris C4C - Configure Ntp Authentication-Key Md5

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2198
configure ntp authentication-key * md5
Purpose
Configures an MD5 key to use with the Network Time Protocol (NTP) authentication.
Default Access Level
15
Command Syntax
configure ntp authentication-key <1-65534> md5 <word>
configure ntp authentication-key <1-65534> md5 <word> no
Supplemental
Information
To remove the MD5 key used with the NTP authentication, use the no option.
Parameters
<1-65534>
ID of the authentication key
<word>
Authentication key may be 1 to 16 null-terminated 7-bit ASCII characters excluding " " (space character), "#" (pound sign, also called
the number sign, hash key, or octothorpe), "\t" (tab), "\n" (line feed), and "\0" (null terminator).