Arris C4C - Configure Cable Metering Report-Cycle Set Interval

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1377
configure cable metering report-cycle set * interval
Purpose
Configures the export reporting cycles for the IPDR streaming feature.
Default Access Level
15
Command Syntax
configure cable metering report-cycle set <1-255> start <hh:mm|random> interval <int>
configure cable metering report-cycle set <1-255> [start <hh:mm|random>] [interval <int>] no
Supplemental
Information
To disable the report cycle, use the no option.
Parameters
<1-255>
Report-cycle set ID
<hh:mm|random>
Start time as hh:mm for this export report cycle set entry, or "random"
<int>
Interval duration in minutes for the export report cycles. Values are 15 - 1440 minutes. The default interval is 60 minutes.
Related Commands
show cable metering (page 2669)
configure cable metering (page 1369)
configure cable metering session-id * data-ack-timeout (page 1380)