Arris C4C - Configure Interface Cable-Mac;Cable Submgmt Default Filter-Group

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1573
configure interface cable-mac * cable submgmt default filter-group
Purpose
Provisions the subscriber management for the specified filter group.
Default Access Level
15
Command Syntax
configure interface cable-mac <mac[.s]> cable submgmt default filter-group <cm | cpe | mta | ps | stb |
host> <upstream | downstream> <group-id>
configure interface cable-mac <mac[.s]> cable submgmt default filter-group <cm | cpe | mta | ps | stb |
host> <upstream | downstream> [<group-id>] no
Supplemental
Information
To delete a specific filter group, use the no option.
Parameters
<mac[.s]>
The MAC identifier and optional sub interface.
<cm |
CM group defaults.
cpe |
Regular CPE group defaults
mta |
Packetcable MTA group defaults
ps |
CableHome PS group defaults
stb |
DSG STB group defaults
host>
CPE, MTA, PS, and STB group defaults
<upstream | downstream>
Filters on either the upstream or downstream direction
<group-id>
The filter group ID. Range is 1 - 1023.