Arris C4C - Configure Interface Link-Aggregate Encapsulation Dot1 Q

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1836
configure interface link-aggregate * encapsulation dot1q
Purpose
Sets the encapsulation type for the specified interface to Q-tag, as defined by IEEE 802.1Q.
Default Access Level
15
Command Syntax
configure interface link-aggregate <0-9[.0-254]> encapsulation dot1q <int>
configure interface link-aggregate <0-9[.0-254]> encapsulation dot1q [<int>] no
Supplemental
Information
To return to default settings, use the no option.
Parameters
<0-9[.0-254]>
LAG identifier <lag[sub interface]>
<int>
Q-tag as defined by IEEE 802.1Q