Arris C4C - Configure Interface Tengigabitethernet Ip Vrf Forwarding

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2011
configure interface tengigabitethernet * ip vrf forwarding
Purpose
Configures the VRF associated with the interface.
Default Access Level
15
Command Syntax
configure interface tengigabitethernet <slot>/<port>[.<0-254>] ip vrf forwarding <name>
configure interface tengigabitethernet <slot>/<port>[.<0-254>] ip vrf forwarding <name> no
Supplemental
Information
To remove the VRF, use the no option.
Parameters
<slot>/<port>[.<0-
254>]
RCM slot number/tengigabitEthernet port number[.subinterface number].
Valid range for the C4 CMTS is <17-18>/<10>[.<0-254>]
Valid range for the C4c CMTS is <17>/<10>[.<0-254>]
<name>
VRF name