Arris C4C - Configure Route-Map Set Community Add

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2298
configure route-map * set community add
Purpose
Adds the specified community to the set of communities in this community number.
Default Access Level
15
Command Syntax
configure route-map <name> set community add <word> [local-as] [no-advertise] [no-export] [internet]
Supplemental
Information
N/A
Parameters
<name>
Name of this route-map.
<word>
Community number to add.
[local-as]
Do not send outside local AS (well-known community)
[no-advertise]
Do not advertise to any peer (well-known community)
[no-export]
Do not export to next AS (well-known community)
[internet]
Internet (well-known community)