Arris C4C - Configure Router Ospf Routerid

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2504
configure router ospf * routerid
Purpose
Configures the router ID for this OSPF instance.
Default Access Level
15
Command Syntax
configure router ospf [vrf <name>] router-id <router-id>
configure router ospf [vrf <name>] router-id [<router-id>] no
Supplemental
Information
Note: The C4 CMTS does not calculate the OSPF router ID if none is specified. It is recommended that the user configure the router
id and not rely on the default values.
To delete the router ID for the VRF, use the no option.
Parameters
[vrf <name>]
Name of the assigned VRF.
<router-id>
IP address representing the router ID