Arris C4C - Configure Interface Tengigabitethernet Ip Pim Message-Holdtime

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1997
configure interface tengigabitethernet * ip pim message-holdtime
Purpose
Configures the PIM router message (prune/join) hold time.
Default Access Level
15
Command Syntax
configure interface tengigabitethernet <slot>/<port>[.<0-254>] ip pim message-holdtime <1-65535>
configure interface tengigabitethernet <slot>/<port>[.<0-254>] ip pim message-holdtime [<1-65535> ]no
Supplemental
Information
To reset the hold time, use the no option.
Parameters
<slot>/<port>[.<0-
254>]
RCM slot number/tengigabitEthernet port number[.subinterface number].
Valid range for the C4 CMTS is <17-18>/<10>[.<0-254>]
Valid range for the C4c CMTS is <17>/<10>[.<0-254>]
<1-65535>
Prune/join message holdtime in seconds