Arris C4C - Configure Router Bgp Aggregate-Address

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2377
configure router bgp * aggregate-address
Purpose
Configures the routes that match the aggregate IP address and mask to be aggregated.
Default Access Level
15
Command Syntax
configure router bgp <int> aggregate-address <A.B.C.D> <mask>
configure router bgp <int> aggregate-address <A.B.C.D> <mask> no
Supplemental
Information
The aggregate routes and the specific routes would be advertised out.
To disable, use the no option.
Parameters
<int>
Autonomous System (AS) number. Valid range is 1-65535
<A.B.C.D>
IP address of the aggregate.
<mask>
Aggregate mask.