Arris C4C - Show Cable Modem Format

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2696
show cable modem format
Purpose
This command allows the user to create their own formatted output.
Default Access Level
1
Command Syntax
show cable modem format <format name>
Supplemental
Information
The advantage of FORMAT over COLUMN is the ability to use filters and store the format for later use. This command is similar to
the show cable modem column command.
A format must be configured in order to execute this command. This can be done by executing the configure cable modem format
command.
Parameters
<format name>
The name of the configured format desired.
Related Commands
show cable modem (page 2670)
show cable modem column (page 2687)
configure cable modem format (page 1385)