Arris C4C - Clear Cable Modem

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1148
clear cable modem
Purpose
Deletes or resets one or more cable modems.
Default Access Level
15
Command Syntax
clear cable modem <addr> [all] [bonded] [bonded-impaired] [cable-downstream <slot/port>] [cable-mac
<mac>] [cable-upstream <slot/us_port[.lc]>] [delete] [offline] [oui <word>] [rate <1-20>] [reject]
[reset] [slot <0-15>] [vendor <name>]
Supplemental
Information
N/A
Parameters
<addr>
IPv4/IPv6 address or MAC address.
[all]
Filters on all cable modems
[bonded]
Filters on bonded cable modems
[bonded-impaired]
Filters on bonded cable modems that are not functioning at full capacity.
[cable-downstream
<slot/port>]
Reset or delete cable modems on a downstream interface.
[cable-mac <mac>]
Resets or deletes cable modems on the cable-mac
[cable-upstream
<slot/us_port[.lc]>]
Reset or delete cable modems on an upstream interface.
[delete]
Deletes the specified cable modem
[offline]
Filters on offline cable modems