Arris C4C - Сonfigure Interface Cable-Downstream Cable Dsg Ds-Frequency-List

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1472
configure interface cable-downstream * cable dsg ds-frequency-list
Purpose
Associates the list of downstream frequencies that is to be included in the DCD message that is sent down the specified interface.
Default Access Level
15
Command Syntax
configure interface cable-downstream <slot/port> cable dsg ds-frequency-list <0-4294967295>
configure interface cable-downstream <slot/port> cable dsg ds-frequency-list <0-4294967295> no
Supplemental
Information
To remove the association, use the no option.
Parameters
<slot>
The chassis slot in which the targeted downstream Cable Access Module resides. Valid range for the C4 CMTS is 0-15; valid range for
the C4c CMTS is 10-15.
<port>
The downstream port.
<0-4294967295>
The downstream channel list index.