Arris C4C - Сonfigure Interface Link-Aggregate Ip Rip Authentication Key-Chain

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1877
configure interface link-aggregate * ip rip authentication key-chain
Purpose
Specified the set of keys that can be used on the specified interface.
Default Access Level
15
Command Syntax
configure interface link-aggregate <0-9[.0-254]> ip rip authentication key-chain <keychain1>
configure interface link-aggregate <0-9[.0-254]> ip rip authentication key-chain [<keychain1>] no
Supplemental
Information
To remove the set of keys used on the specified interface, use the no option.
Parameters
<0-9[.054]>
LAG identifier <lag[sub interface]>
<keychain1>
A 1-16 character text string used for authentication.