Arris C4C - Configure Router Ospf Distribute-List out

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2492
configure router ospf * distribute-list * out
Purpose
Configures filtering for outbound OSPF routes.
Default Access Level
15
Command Syntax
configure router ospf [vrf <name>] distribute-list <number> out <connected | static | rip | bgp | isis>
configure router ospf [vrf <name>] distribute-list [<number>] out [<connected | static | rip | bgp |
isis>] no
Supplemental
Information
To disable filtering OSPF outbound routes, use the no option.
Parameters
[vrf <name>]
Name of the assigned VRF.
<number>
Access list number. Valid range is 1-99.
[<connected |
static | rip | bgp |
isis>]
Valid routing protocol is RIP.