Arris C4C - Configure Router Isis Address-Family Ipv4 Redistribute Ospf

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2437
configure router isis address-family ipv4 redistribute ospf
Purpose
Redistributes OSPF routes into IS-IS.
Default Access Level
15
Command Syntax
configure router isis address-family ipv4 redistribute ospf <level-1 | level-2> [match <internal |
external1 | external2>] [metric <int>] [metric-type <internal | external>]
configure router isis address-family ipv4 redistribute ospf <level-1 | level-2> [match <internal |
external1 | external2>] [metric <int>] [metric-type <internal | external>] no
Supplemental
Information
To disable the redistribution, use the no option.
Parameters
<level-1>
Import as level 1 route
<level-2>
Import as level 2 route
[match <internal |
external1 |
external2]
Specifies the type of OSPF routes to redistribute into IS-IS.
[metric <int>]
Metric associated with redistributed routes. Valid range is 0-16777214.
[metric-type
<internal |
external>]
Metric type associated with redistributed routes. Specify whether redistributed routes use internal or external metrics.