Arris C4C - Configure Router Bgp Address-Family Ipv4 Distribute-List out Rip

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2336
configure router bgp * address-family ipv4 distribute-list out rip
Purpose
Configures filtering for outbound BGP routes originating from RIP.
Default Access Level
15
Command Syntax
configure router bgp [<int>] address-family ipv4 distribute-list <1-99 | acl> out rip
configure router bgp [<int>] address-family ipv4 distribute-list <1-99 | acl> out rip no
Supplemental
Information
To disable, use the no option.
Parameters
[<int>]
Autonomous System (AS) number. Valid range is 1-65535
<1-99 | acl>
The IP standard access list or the access list name (no spaces).