Arris C4C - Configure Router Ospf Redistribute Isis

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2501
configure router ospf * redistribute isis
Purpose
Configures redistribution routes from Intermediate System-to-Intermediate System (IS-IS) routing processes into OSPF.
Default Access Level
15
Command Syntax
configure router ospf [vrf <name>] redistribute isis [<level1 | level-1-2 | level-2>] [metric <int>]
[route-map <int>]
configure router ospf [vrf <name>] redistribute isis [<level1 | level-1-2 | level-2>] [metric <int>]
[route-map <int>] no
Supplemental
Information
To restore the system to its default condition, use the no option.
Parameters
[vrf <name>]
The name assigned to the virtual router
[<level-1 | level-1-2
| level-2>]
Specifies the type of adjacencies to be formed on this interface. If no value is specified, then modify value for both level-1 and level-
2.
[metric <metric
value>]
Metric used for redistributed route. Values 0 to 255. Default is zero.
[metric-type <1 |
2>]
External link type associated with the default route advertised into the OSPF routing domain. Values are: 1 (type 1 internal route); or
2 (type 2 external route). Default is type 2.
[tag <tag value>]
32-bit decimal value attached to each external route. Defaults to 0.