Arris C4C - Configure Reset Cable-Modem Cable-Downstream

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2245
configure reset cable-modem * cable-downstream
Purpose
Resets all the cable modems on a specified downstream interface.
Default Access Level
15
Command Syntax
configure reset cable-modem [delete] [bonded] [offline] [reject] [vendor <word>] [oui <word>] [all]
[bonded-impaired] cable downstream <word>
Supplemental
Information
N/A
Parameters
[delete]
Deletes the requested CM(s)
[bonded]
Filters on bonded CMs
[offline]
Filters on offline CMs
[reject]
Filters on rejected CMs
[vendor <word>]
Filters on CMs for a specified vendor
[oui <word>]
Filters on CMs with specified OUI (most significant 3 bytes of Vendor MAC address)
[all]
Filters on all CMs
[bonded-impaired.
Filters on bonded CMs that are not functioning at full capacity
<word>
Downstream <slot/conn[/port]>