Arris C4C - Configure Cable Spectrum-Group Min-Codewords

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1429
configure cable spectrum-group * min-codewords
Purpose
Defines the number of codewords that must have been transmitted on the upstream channel before the degradation and
improvement triggers are considered to be valid.
Default Access Level
15
Command Syntax
configure cable spectrum-group <sm_ID> min-codewords <min_codewords>
configure cable spectrum-group <sm_ID> min-codewords [<min_codewords>] no
Supplemental
Information
To reset to the default state, use the no option.
Parameters
<sm_ID>
The number of the spectral group and has a value from 1-40.
<min_codewords>
The minimum number of codewords. This value has a range of 100 to 32768 and the default value is 256.