Arris C4C - Configure Interface Cable-Mac;Ip Igmp Static-Group Source

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1610
configure interface cable-mac * ip igmp static-group * source
Purpose
This is an extension of the IGMP command configure interface cable-mac <mac> ip igmp static-group
<ip_multicast_addr> to statically add membership to an IP multicast group on an IP virtual interface.
Default Access Level
15
Command Syntax
configure interface cable-mac <mac[.s]> ip igmp static-group <A.B.C.D> source <word>
configure interface cable-mac <mac[.s]> ip igmp static-group <A.B.C.D> source <word> no
Supplemental
Information
Note: The IGMP code will inform PIM of the multicast address only if the source IP address is included.
To remove membership to an IP multicast group on an IP virtual interface, use the no option.
Parameters
<mac[.s]>
The MAC identifier and optional sub interface.
<A.B.C.D>
IP address.
<word>
IPv4 source address or qualified domain name.