Arris C4C User Manual

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1488
configure interface cable-downstream * cable voice-limits allowed-normal
Purpose
Defines maximum percentage of the downstream channel bandwidth allowed for normal voice use.
Default Access Level
15
Command Syntax
configure interface cable-downstream <slot/port> cable voice-limits allowed-normal <percent>
Supplemental
Information
Bandwidth is expressed in terms of data throughput and is a function of channel width and compression technique. Allowed-total
should be equal to allowed-emergency. Voice traffic is not recommended on 320 or 640 Kbps channels.
Recommended Settings:
Channel BW allowed-normal allowed-emergency
1.28 Mbps 55% 75%
2.56 Mbps 75% 85%
5.12 Mbps 85% 90%
10.24 Mbps 90% 90%
Parameters
<slot>
The chassis slot in which the targeted downstream Cable Access Module resides. Valid range for the C4 CMTS is 0-15; valid range for
the C4c CMTS is 10-15.
<port>
The downstream port.
<percent>
The percentage of bandwidth to be used. (See table above)

Arris C4C Specifications

General

Brand	Arris
Model	C4C
Category	Control Unit
Language	English