Arris C4C - Configure Cable Metering Session-ID Data-Ack-Timeout

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1380
configure cable metering session-id * data-ack-timeout
Purpose
Configures the maximum time in seconds between DATA_ACK messages sent by the Collector.
Default Access Level
15
Command Syntax
configure cable metering session-id <1-255> data-ack-timeout <1-600>
configure cable metering session-id <1-255> data-ack-timeout no
Supplemental
Information
To return to the default, use the no option.
Parameters
<1-255>
Session ID.
<1-600>
Maximum elapsed time in seconds. Valid numbers are 1 - 600. The default is 60 seconds.
Related Commands
show cable metering (page 2669)
configure cable metering (page 1369)