Arris C4C - Show Cable Filter

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2652
show cable filter
Purpose
Displays the cable IP filter information.
Default Access Level
15
Command Syntax
show cable filter [group <group number>] [verbose] [clearmatches]
Supplemental
Information
N/A
Parameters
[group <group
number>]
IP filter group number. Valid range is 1-1023.
[verbose]
Displays information in list style.
[clearmatches]
Clears match count after displaying it.