Arris C4C - Configure Cable Metering Report-Cycle Start Interval

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1378
configure cable metering report-cycle start * interval
Purpose
Configures the start time and interval duration of the export reporting cycles for the IPDR streaming feature.
Default Access Level
15
Command Syntax
configure cable metering report-cycle start <hh:mm|random> interval <interval>
configure cable metering report-cycle start <hh:mm|random> [interval <interval>] no
Supplemental
Information
To disable the report cycle, use the no option.
Parameters
<hh:mm>
Time to start the export report cycles entered in hh:mm format or as "random".
<interval>
Interval duration in minutes for the export report cycles. Values are 15 - 1440 minutes. The default interval is 60 minutes.
Reated Commands
show cable metering (page 2669)
configure cable metering (page 1369)
configure cable metering session-id * data-ack-timeout (page 1380)