Arris C4C - Configure Interface Gigabitethernet Ip Policy Route-Map-Policy

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1771
configure interface gigabitethernet * ip policy route-map-policy
Purpose
Enables policy routing.
Default Access Level
15
Command Syntax
configure interface gigabitethernet <slot>/<port>[.<0-254>] ip policy route-map-policy <name>
configure interface gigabitethernet <slot>/<port>[.<0-254>] ip policy route-map-policy [<name>] no
Supplemental
Information
To disable, use the no option
Parameters
<slot>/<port>[.<0-
254>]
RCM slot number/gigabitEthernet port number[.subinterface number].
Valid range for the C4 CMTS is <17-18>/<0-9>[.<0-254>]
Valid range for the C4c CMTS is <17>/<0-9>[.<0-254>]
<name>
Route map name