Arris C4C - Configure Router Bgp Address-Family Ipv4 Aggregate-Address

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2331
configure router bgp * address-family ipv4 aggregate-address
Purpose
Configures the routes that match the aggregate IP address and mask to be aggregated.
Default Access Level
15
Command Syntax
configure router bgp [<int>] address-family ipv4 aggregate-address <A.B.C.D> <mask> [as-set] [summary-
only] [suppress-map <word>] [advertise-map <word>] [attribute-map <word>]
configure router bgp [<int>] address-family ipv4 aggregate-address <A.B.C.D> <mask> no
Supplemental
Information
The aggregate routes and the specific routes would be advertised out.
To disable, use the no option.
Parameters
[<int>]
Autonomous System (AS) number. Valid range is 1-65535
<A.B.C.D>
IP address of the aggregate.
<mask>
Aggregate mask.