Arris C4C - Configure Interface Tengigabitethernet Ip Ospf Auto-Delete-Neighbor

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1984
configure interface tengigabitethernet * ip ospf auto-delete-neighbor
Purpose
Automatically deletes the neighbors when adjacency is lost.
Default Access Level
15
Command Syntax
configure interface tengigabitethernet <slot>/<port>[.<0-254>] ip ospf auto-delete-neighbor
configure interface tengigabitethernet <slot>/<port>[.<0-254>] ip ospf auto-delete-neighbor no
Supplemental
Information
To reset, use the no version.
Parameters
<slot>/<port>[.<0-
254>]
RCM slot number/tengigabitEthernet port number[.subinterface number].
Valid range for the C4 CMTS is <17-18>/<10>[.<0-254>]
Valid range for the C4c CMTS is <17>/<10>[.<0-254>]