Arris C4C - Show Bgp Neighbor

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2633
show bgp * neighbor
Purpose
Displays Border Gateway Protocol (BGP) neighbor information.
Default Access Level
15
Command Syntax
show bgp <ipv4 | ipv6 | all> <A.B.C.D[/bits]> neighbor <ipv4-or-ipv6-address> [<advertised-routes
[<paths>]>]
Supplemental
Information
N/A
Parameters
<ipv4 | ipv6 | all>
Address-family for address filter.
<A.B.C.D[/bits]>
Network in the BGP routing table to display.
[<ipv4-or-ipv6-
address>]
Neighbor to display information about.
[<advertised-routes
[<paths>]>]
Displays the advertised routes and/or paths.