Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1509
configure interface cable-mac * cable cm-status event-type * max-num-reports
Configures the maximum number of reports for a single or all event types.
configure interface cable-mac <mac> cable cm-status event-type <all|type> max-num-reports <int>
configure interface cable-mac <mac> cable cm-status event-type <all|type> max-num-reports <int> no
To restore the default value, use the no option.
Parameters
The MAC identifier. Valid numbers are 0-415.
Select from the following event condition types:
secondaryChlMddTimeout
qamFecLockFailure
seqOutOfRange
mddRecovery
qamFecLockRecovery
t4Timeout
t3RetriesExceeded
t3RangingRecovery
cmOnBatteryBackup
cmAcPowerRestored
all
The range of number of reports. Valid number is 0-255. Zero means an unlimited number of reports.